Using groundwater causes serious mineral scaling problems. Before the Vulcan descaler was installed workers had to clean with acids every 3 months. After 6 using the Vulcan descaler workers have not have to clean the same systems.
Vulcan S250 was installed on the chiller in the generator room, to ensure the long-term operation efficiency of the chiller and to avoid scale deposits.
The cooling tower system required manual cleaning 4-6 times a year. 6 months after installing the Vulcan S100 no new scale had formed in the cooling system
6 months after installing the Vulcan descaler they still did not need to descale and clean their heat plate exchangers.
The cement production process generates excessive mineral scale accumulation in the cooling water pipes. This causes pipes to become blocked impacting production.
The factory had been operating for more than a year without any water treatment and the built-up mineral scale impacted cooling efficiencies, and reduced water flow and pressure.
The Penoles industry is a metallurgy mining company in Mexico. The Vulcan mineral descaler is used to remove huge concentrations of mineral scale in their mining operations: 70 gr/l – 70,000 Mg/ L – 4,090 GPG
Vulcan used to solve the scaling problems in the circulating water systems of the sterilizer and the reheater.
After 1 year with the Vulcan descaler, the condenser approach temperature of the chiller has been reduced and there is no need to clean the condenser tubes every 6 months.
After 6 months of installation, the factory data center platform showed that the heat exchanger temperature still did not rise, so it can be determined that there is no new scale.
Page 2 of 6
